29
2023
-
06
There are three main forms of wear-resistant coatings for metals
1: for spraying metal wear-resistant coating process, the supersonic spraying equipment or plasma spraying equipment, the production of metal wear-resistant coating thickness is thin, generally is about 0.3mm.
The inner wall of the flow meter pipe is coated with metal wear-resistant coating, and the thickness of the coating is 0.2mm.
2: sintered metal wear-resistant coating, this metal wear-resistant coating is generally used to prefabricated metal wear-resistant coating and then re-sintered into the vacuum furnace, the thickness can reach 1mm, the bonding strength is higher than the sprayed metal wear-resistant coating.
Wear-resistant block surface production of metal wear-resistant coating, thickness of 1mm
3: Surfacing chromium carbide metal wear-resistant layer, this process is the more traditional process, the thickness can be made according to the requirements, Beijing Naimo company's chromium carbide metal wear-resistant coating thickness is generally 5mm.
The thickness of chromium carbide metal wear-resistant coating is 5mm.
The above three kinds of metal wear-resistant coating is the more common coating process, three kinds of metal wear-resistant coating process are different, of course, the performance of the coating is also different.
Previous Page
Previous Page
RELATED INFORMATION